KeenCut Logo

European & Worldwide Enquiries: +44 (0)1536 263158 (Keencut HQ)

Javelin Integra

The Keencut Javelin-Integra range of precision cutter bars is designed to exceed the most demanding standards of accuracy. Javelin-Integra incorporates the  unique design of the Javelin-Series 2 which allows Keencut technicians to factory adjust for straightness, using laser technology, to within 0.2mm over the 3.1 metre length of the cutter bar (1:15000). The accuracy of the Javelin-Integra makes it ideal for cutting banner materials, pop-ups and other display materials that require precise and accurate cutting for perfect alignment.

The Javelin-Integra features a mounted Javelin-Series 2 with integral Lift & Hold Levers on an Aluminium Base Plate. Javelin-Integra can be attached to an existing work table or a Keencut Proteus Bench to create a complete cutting station in your workshop.

The Javelin-Integra is supplied with three Vertical Blade Holders for optimum versatility enabling the operator to cut a wide range of materials up to an impressive thickness of 13mm. The patented linear bearings have been tested under load for 1600km (1000 miles) and carry a 20 year replacement guarantee. Three full length silicon rubber grip strips on the cutter bar and base plate ensure all work is clamped when cutting and also protect the surface of the material being cut.

The Keencut Javelin-Integra is ideal for cutting PVC Foamboard – Vinyl – Woven Fabrics – Foam Centred Board – Honeycomb & Corrugated Plastics – Film – Paper – Tissue and many more flexible and rigid materials.

 

Click to see the material this cutter will cut                  Compare Cutters Icon

Javelin Integra

Outstanding Features:

Javelin Integra - Bench mounted cutter bar offering simplicity of operation and supreme accuracy

 

Vertical Cutting Action

  • Engage all blades on the Vertical Cutting Head using downward hand pressure
  • Patented space age bearing and slide system designed for operator adjustment and minimal maintenance

Graphik Blade Holder included as standard

Accepts Keencut Graphik Blades designed specifically for the Signmaker and Digital Printer:

  • Specially designed knife edge for extra stability in tougher materials
  • Extend cutting depth up to 13mm
  • Reversible - Set the blade to cut Left-Right or Right-Left
  • Increased durability and reduced tip breakage
  • Hard wearing & Oil-free
  • 10 Graphik Blades included with each machine

Rotary Blade Holder included as standard

  • Cold cut textiles and other delicate materials
  • Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive
  • Comes fitted with red blade guard to be engaged when not in use for optimum safety
  • A cutting mat is required (not supplied) when using the Rotary Blade Holder

Medium Duty Blade Holder Included as standard

  • Use standard off-the-shelf utility blades
  • Adjust to a blade depth of 10mm
  • Each machine is supplied with a pack of 100 Medium Duty Utility Blades

Blade Depth Adjuster

  • Both the Medium Duty Blade Holder and Graphik Blade Holder feature quick height adjustment sliders
  • Adjust the blade depth on the Medium Duty blade up to 10mm cutting depth
  • Adjust the blade depth on the Graphik blade up to 13mm cutting depth 

 

Blade Clamp

  • All blade holders come with a single 'blade clamp knob' for quick adjustment
  • A quick turn and the blade is unclamped for removal or adjusting cutting depth

Unique features of the Javelin Integra

  • 3-Piece Base plate with integrated silicon strip to hold materials securely while clamped
  • Lift-&-Hold System is perfectly balanced for ease of use
  • Integral baseplate comes with full-length cutting groove for use with the Medium Duty Blade and Graphik Blade
  • Base has angled rear edge for easy loading of material

ACCURACY

In 1999 the original Javelin Cutter Bar was produced using a specialist Laser system to calibrate the full length of the cutting track.  This method of production, unique to Keencut, ensures that every Evolution, Javelin & Javelin Integra cutting system is factory guaranteed to cut straight to within 0.2 mm along the full length - perfect for creating a seamless appearance in displays and installations. 

Features & Performance

  • Outstanding 1:15000 straightness accuracy guarantee making the Javelin Integra ideal for Pop-up banner displays
  • With a lightweight base included the Javelin Integra is designed to fit onto any bench
  • Comes as standard with three different types of Blade Holders: Graphik Blade Holder (1), Medium Duty Blade Holder (1) and the Circular Knife Blade Holder (1) to provide maximum versatility and cutting options
  • Reverse the Graphik Blades (included) to set the machine to cut Left-Right, Right-Left or both
  • Using the single tool cutting and included blade holders, switch between cutting different materials in seconds
  • The new large diameter textile wheel improves performance and longevity – cutting mat will be required
  • When heat cutting and sealing is required the Keencut Hot Knife Holder sliding head can be quickly attached with the appropriate electric Hot Knife and detached in seconds
  • Fully equipped and ready to work with blades included
  • Patented space age bearing and slide system designed for operator adjustment and minimal maintenance
  • Available in four practical sizes, from 1.6 to 3.1 metres

Ease of operation & safety

  • Blade locking thumb screw adds safety & convenience
  • Tools interchange quickly for maximum productivity
  • Lift and hold mechanism enables the user to lift & load the cutter using levers at both ends rather than lifting the bar
  • Spring loaded blade holders immediately retract when not in use
  • Multiple integral full length grip cords hold work safe and sure while cutting
  • Total dust free operation - safe to use near printers and plotters
  • Circular knife supplied with blade guard to be engaged when not in use

Guarantees & Construction

  • 100% manufactured by Keencut Technicians in England
  • 99.98% of materials from the best suppliers in Western Europe
  • High tensile aerospace aluminium alloy construction
  • Super grade anodising for lifetime good looks and function
  • Designed specifically for the design & display industries
  • 5 year comprehensive guarantee
  • 20 year replacement guarantee on all slide bearings

 

Materials the Javelin Integra will cut

  • Flag, banner, PVC Foamboard, foamcore, cardboard, corrugated plastic, polystyrene, flexible polycarbonate, flexographic plates, flooring tiles, magnetic sheet, film, self-adhesive materials and more
  • For a list of materials and thicknesses the Javelin Integra will cut please refer to the Product Comparison Chart
  • To compare the Javelin Integra against the complete range of Keencut Cutter Bars please refer to the Cutter Bar Comparison Chart

 

 

JIT Dims Dec 2

 

For ease of viewing: DOWNLOAD PDF OF DIMENSIONAL CHART HERE

 

 

Javelin Integra: Optional Accessories Explained

 

General Purpose Cutting Benches

  • The General Purpose Benches incorporate the Keencut PROTEUS framework system
  • Strong and rigid even under heavy load
  • Fast easy construction
  • For more information CLICK HERE

 

ADDITIONAL VERTICAL ACTION BLADE HOLDERS 

  • Circular Blade Holder (VABHC)
    • Supplied complete with Circular Blade
    • Cold cut textiles and other delicate materials
    • Ideal for trimming thin strips off banners and posters where a knife blade would be too aggressive 
  • Medium Duty Blade Holder (VABHML)
    • Use standard off-the-shelf utility blades
    • Adjust to a blade depth of 10mm         
  • Graphik Blade Holder (VABHG)
    • Accepts specially designed Keencut Graphik Blades
    • Adjust to a blade depth of 13mm

  

HOT KNIFE HOLDER

  • The new Hot Knife Holders provide hot knife users with a safe, quick and accurate means of cutting and sealing synthetic fabrics, belting, webbing and more.
  • Includes a spring loaded mounting block for easy mounting to the cutter's slideway
  • A spring loaded trigger automatically activates the Hot Knife when depressed but instantly switches off once released
  • Run on the Keencut patented space age bearing and slide system designed for operator adjustment and minimal maintenance
  • Provides a safe and accurate alternative to using a Hot Knife free hand with a straight edge
  • The Hot Knife cuts approximately 3mm (1/8”) from the edge of the Sabre cutter bar, ensuring straight line cuts in the same location every time
  • The hot knife is securely held in place whilst heating up, keeping the potentially dangerous hot blade at a distance ensuring maximum safety
  • Product Codes:
    • Holder for HSGM Cutter, Model HSG-0. Product Code: HOT
    • Holder for AZ Cutter, Model TC20. Product Code: HOTAZ

YOU MAY ALSO BE INTERESTED IN

Go to Evolution E2 page

Evolution E2

Extreme Precision & Accuracy ideal for Pop-Up Displays-Double Head-Table Top Mounted-Up to 3.6m cut length-Sign Making & Digital Print Specific-Banner, textiles, rigid boards & more-Fully equipped

Go to SteelTraK page

SteelTraK

Heavy Duty Vertical Cutter for Signmakers & Printers-Up to 2.5m cut length-For DiBond, PVC Foamboard, Acrylic & more-Zero debris-Superb build quality & low maintenance-Easy operation under heavy load

Go to Multi-Purpose Cutting Benches page

Multi-Purpose Cutting Benches

Constructed from the Keencut Proteus all-alloy beam and leg system the unique locking system provides strength and rigidity for the safe support of even heavy pieces of equipment. Tops not provided.

Go to Javelin Series 2 page

Javelin Series 2

Extreme Precision & Accuracy ideal for Pop-Up Displays-Single Head-Cutter Bar with Table Mount Option-Up to 3.1m cut length-Sign Making & Digital Print Specific-Banner, textiles, rigid boards & more

Go to Hot Knife Holder-HSGM Only page

Hot Knife Holder-HSGM Only

Hot Knife holder to use with HSGM Hot Knife Model HSG-0. Use with Sabre HotCut System or other suitable Keencut cutter. Quick, safe & accurate cutting and sealing of fabrics, belting, webbing & more.

Go to Hot Knife Holder - AZ Only page

Hot Knife Holder - AZ Only

Hot Knife holder to use with AZ Hot Knife Model TC 20. Use with Sabre HotCut System or other suitable Keencut cutter. Quick, safe & accurate cutting and sealing of fabrics, belting, webbing & more.