How to replace the cutting head cover on the Excalibur 6000
To do this you will need an Excalibur 6000 head cover assembly >
Tools required:
- 10mm spanner/wrench
- Move the multi-tool cutter to a comfortable height and lock it in position using the white nylon locking screw. Ensure that this is done tightly.
- Unlock and swing down the cutter guard.
- Remove the dome headed nut using a 10mm spanner/wrench.
- Remove the guard along with the two steel washers and rubber washer.
- Replace and assemble the new guard along with the two steel washers, rubber washer, and dome headed nut using a 10mm spanner/wrench.
- Tighten the dome headed nut so the guard swings up and down but is not too loose to fall off.
- Swing the guard up, ensuring it is locked close with the black knob.
Ⓒ Keencut 2020 | Baird Rd, Corby NN17 5ZA United Kingdom | Contact us
Created by DeType | Privacy | Website Disclaimer | Terms & Conditions
